Чудеса...А чё диллер говорит?
Чудеса...
Ну на природе можно и стекла опустить, тоже будет слышно. А концевик никуда не слетит в стойку? Потом не надо резьбу этим болтом искать чтобы обратно прикрутить?
не, ниче не слетит. все гуд буиит.Сообщение от Paperworm
А не легче, сначала дверь открыть(любую), а потом ключ провернуть - писка не будет! Ну народ...
Последний раз редактировалось CuMC; 28.05.2009 в 09:34.
Так магнитола выключится.. ну народ..
Цель как раз включить магнитолу с уже открытыми дверями, у меня проходит... слушаю без писка.
как вариант можно зажечь приборку, тогда 3 раза пискнит и перестанет
ИМХО лучше открыть другие двери
Чего вы все набросились?
Фишка полезная? Полезная. Не нравится не применяйте... Вот смешные
Steps to set Auto-Lock modes on.
Turn Door lock ON for vehicles with auto transmission when the car reaches 9MPH/15KPH:
1) Make sure the shift lever is in PARK (P), and close the driver's door.
2) Turn the ignition to the ON (II) position.
3) Set the Parking Brake.
4) Push and hold the brake pedal, then move the shift lever out of PARK.
5) Push and hold the front of the master door lock switch on the driver's door. You will hear a clicking sound, and after about 5 seconds, you will hear another clicking sound.
6) Release the switch, move the shift lever to PARK, and then turn the ignition switch to the LOCK (0) position within 5 seconds.
Turn Door lock ON for vehicles with manual transmission when the car reaches 9MPH/15KPH:
1) Close the driver's door.
2) Turn the ignition to the ON (II) position.
3) Set the Parking Brake.
4) Push and hold the front of the master door lock switch on the driver's door. You will hear a clicking sound, and after about 5 seconds, you will hear another clicking sound.
5) Release the switch, and then turn the ignition switch to the LOCK (0) position within 5 seconds.
Turn Door lock ON for vehicles when shifted from "Park" position. (Automatic Only)
1) Make sure shift lever is in Park position, and close the drivers door.
2) Turn the ignition switch to the ON (II) position.
3) Set the Parking Brake.
4) Push and hold the front of the master door lock switch on the driver's door. You will hear a clicking sound, and after about 5 seconds, you will hear another clicking sound.
5) Release the switch, and turn the ignition switch to the LOCK (0) position within 5 seconds.
Steps to set Auto-Unlock modes on.
The auto-door unlocking feature has two or three possible settings, depending on transmission.
These modes are:
Door unlocks whenever you turn the ignition to LOCK (0) position.
On Automatic transmissions, the driver's door unlocks when you move the shift lever to the PARK (P) position.
The auto-lock is deactivated all the time (factory default.)
To unlock the driver's door on automatic vehicles when the ignition switch is out of the ON (II) position.
1) Make sure the shift lever is in PARK (P), and close the driver's door.
2) Turn the ignition switch to the ON (II) position.
3) Set the parking brake.
4) Push and hold the brake pedal, then move the shift lever out of PARK (P).
5) Push and hold the rear of the master door lock switch on the driver's door. You will hear a clicking sound, and after about 5 seconds, you will hear another clicking sound.
6) Release the switch, move the shift lever to Park (P), and turn the ignition switch to the LOCK (0) position within 5 seconds.
To unlock the driver's door on manual vehicles when the ignition switch is out of the ON (II) position.
1) Close the driver's door.
2) Turn the ignition switch to the ON (II) position.
3) Set the parking brake.
4) Push and hold the rear of the master door lock switch on the driver's door. You will hear a clicking sound, and after about 5 seconds, you will hear another clicking sound.
5) Release the switch, and turn the ignition switch to the LOCK (0) position within 5 seconds.
To unlock the driver's door when shifted into "Park" position. (Automatic Only)
1) Make sure shift lever is in PARK (P), and close the driver's door.
2) Turn the ignition switch to the ON (II) position.
3) Set the parking brake.
4) Push and hold the rear of the master door lock switch on the driver's door. You will hear a clicking sound, and after about 5 seconds, you will hear another clicking sound.
5) Release the switch, and turn the ignition switch to the LOCK (0) position within 5 seconds.
Disabling Door Lock Modes, both Automatic and Manual
1) Open the drivers door. [On Vehicles with automatic transmission, make sure the shift lever is in PARK (P).]
2) Turn the ignition switch to the ON [II] position.
3) Set the parking brake.
4) Push and hold the front of the master door lock switch on the driver's door. You will hear a clicking sound, and after about 5 seconds, you will hear another clicking sound.
5) Release the switch, and turn the ignition switch to the LOCK (0) position within 5 seconds.
Disabling Door Unlock Modes, both Automatic and Manual
1) Open the drivers door. [On Vehicles with automatic transmission, make sure the shift lever is in PARK (P).]
2) Turn the ignition switch to the ON [II] position.
3) Set the parking brake.
4) Push and hold the rear of the master door lock switch on the driver's door. You will hear a clicking sound, and after about 5 seconds, you will hear another clicking sound.
5) Release the switch, and turn the ignition switch to the LOCK (0) position within 5 seconds.
* All settings of the Door Locks will retain setting even if the battery is disconnected.
на рестайлинге, не смотря на наличие центральной кнопки закрытия дверей, автоматическое закрытие не работает. ни один из приведенных здесь вариантов не сработал.если конкретней, то нет второго щелчка при удержании кнопки закрытия. если кому все ж удалось это сделать - поделитесь, как.
Ваши права
Ответить с цитированием